(1) The 2021 International Building Code, as published by the International Code Council, 4051 Flossmoor Road, Country Club Hills, IL 60478, October 23, 2020, Chapters 1 through 35 inclusive and Appendices A, C, D, E, F, G, H, I, J, K, and N, is hereby incorporated by this reference as part of this Building Code to have the same force and effect as if set forth in this Chapter in every particular, save and except such portions as are added, amended, deleted, or replaced in this Chapter. The adopted code includes comprehensive provisions and standards regulating the construction, alteration, movement, enlargement, replacement, repair, equipment, use and occupancy, location, maintenance, removal and demolition of buildings and structures for the purpose of safeguarding the public health, safety and general welfare. All references in this Code to the International Building Code are to the edition referenced above.

(2) The 2021 International Residential Code, as published by the International Code Council, 4051 Flossmoor Road, Country Club Hills, IL 60478, January 21, 2021, Chapters 1 through 44 inclusive and Appendices AA, AB, AC, AE, AF, AH, AI, AM, AN, AO, and AT, is hereby incorporated by this reference as part of this Building Code to have the same force and effect as if set forth in this Chapter in every particular, save and except such portions as are added, amended, deleted, or replaced in this Chapter. The adopted code includes comprehensive provisions and standards regulating the construction, alteration, movement, enlargement, replacement, repair, equipment, use and occupancy, location, removal and demolition of the attached one (1) and two (2) family dwellings and multiple single-family dwellings (townhouses) not more than three (3) stories in height with a separate means of egress and their accessory structures. The purpose of this Code is to provide minimum requirements to safeguard the public health, safety and general welfare, through affordability, structural strength, means of the egress facilities, stability, sanitation, light and ventilation, energy conservation and safety to life and property from fire and other hazards attributed to the built environment. All references in this Code to the International Residential Code are to the edition referenced above.

(3) The 2023 National Electric Code, as published by the NFPA, 1 Batterymarch Park, Quincy, MA 02169-7471, August 12, 2022, effective date September 1, 2022, Chapters 1 through 9 and Appendices A through I, as adopted by the Colorado State Electrical Board, including appendices, is hereby incorporated by this reference as a part of this Building Code to have the same force and effect as if set forth in this Chapter in every particular, save and except such portions as are added, amended, deleted, or replaced in this Chapter. The purpose of this Code is regulating the installation of electric conductors and equipment within or on public and private buildings or other structures, including mobile homes, recreational vehicles, floating buildings and other premises such as yards, carnivals, parking lots and industrial substations; the installation of conductors and equipment that connect to the supply of electricity; the installation of other outside conductors and equipment on premises; and the installation of optical fiber cable in the Town. All references in this Code to the National Electric Code are to the edition referenced above.

(4) The 2021 International Mechanical Code, as published by the International Code Council, 4051 Flossmoor Road, Country Club Hills, IL 60478, March 6, 2020, Chapters 1 through 15 inclusive and Appendix A, is hereby incorporated by this reference as a part of this Building Code to have the same force and effect as if set forth in this Chapter in every particular, save and except such portions as are added, amended, deleted, or replaced in this Chapter. This Code shall regulate the design, installation, maintenance, alteration and inspection of mechanical systems that are permanently installed and utilized to provide control of environmental conditions and related processes within buildings. This Code shall also regulate those mechanical systems, system components, equipment and appliances specifically addressed herein. All references in this Code to the International Mechanical Code are to the edition referenced above.

(5) The 2021 International Fuel Gas Code, as published by the International Code Council, 4051 Flossmoor Road, Country Club Hills, IL 60478, March 6, 2020, Chapters 1 through 8 and Appendices A through C, is hereby incorporated by this reference as a part of this Building Code to have the same force and effect as if set forth in this Chapter in every particular, save and except such portions as are added, amended, deleted, or replaced in this Chapter. The adopted code includes comprehensive provisions and standards regulating the erection, installation, alteration, repairs, relocation, replacement, addition to, use or maintenance of fuel gas piping systems, fuel gas utilization equipment and related accessories within this jurisdiction. All references in this Code to the International Fuel Gas Code are to the edition referenced above.

(6) The 2021 International Plumbing Code, as published by the International Code Council, 4051 Flossmoor Road, Country Club Hills, IL 60478, March 6, 2020, Chapters 1 through 15 and Appendices B, C and E, is hereby incorporated by this reference as a part of this Building Code to have the same force and effect as if set forth in this Chapter in every particular, save and except such portions as are added, amended, deleted, or replaced in this Chapter. The adopted code includes comprehensive provisions and standards regulating the erection, installation, alteration, repairs, relocation, replacement, addition to, use or maintenance of plumbing systems within this jurisdiction. This Code shall also regulate nonflammable medical gas, inhalation anesthetic, vacuum typing, nonmedical oxygen systems and sanitary and condensate vacuum collection systems. All references in this Code to the International Plumbing Code are to the edition referenced above.

(7) The 2021 International Existing Building Code, as published by the International Code Council, 4051 Flossmoor Road, Country Club Hills, IL 60478, December 28, 2020, Chapters 1 through 16 inclusive and Appendices A, B, and C and Resource Chapter A, is hereby incorporated by this reference as a part of this Building Code to have the same force and effect as if set forth in this Chapter in every particular, save and except such portions as are added, amended, deleted, or replaced in this Chapter. The adopted code is intended to provide alternative approaches to remodeling, repair or alteration of existing buildings. Many existing buildings and structures do not comply with the current building code requirements for new construction. Although many of these buildings are potentially salvageable, rehabilitation is often cost-prohibitive because compliance with all the requirements for new construction could require extensive changes that go well beyond the value of the building or the original scope of the rehabilitation. At the same time, it is necessary to regulate construction in existing buildings that undergo additions, alterations, renovations, extensive repairs or change of occupancy. Such activity represents an opportunity to ensure that new construction complies with the current building codes and that existing conditions are maintained, at a minimum, to their current level of compliance or are improved as required to meet basic safety levels. To accomplish this objective, and to make the rehabilitation process easier, this Code allows for options for controlled departure from full compliance with the International Codes dealing with new construction, while maintaining basic levels for fire prevention, structural and life safety features of the rehabilitated building. All references in this Code to the International Existing Building Code are to the edition referenced above.

(8) The 2021 International Energy Conservation Code, as published by the International Code Council, 4051 Flossmoor Road, Country Club Hills, IL 60478, January 29, 2021, Chapters 1 through 6, is hereby incorporated by this reference as a part of this Building Code to have the same force and effect as if set forth in this Chapter in every particular, save and except such portions as are added, amended, deleted, or replaced in this Chapter. The adopted code regulates minimum energy conservation requirements for new buildings. The IECC addresses energy conservation requirements for all aspects of energy uses in both commercial and residential construction, including heating and ventilating, lighting, water heating, and power usage for appliances and building systems. All references in this Code to the International Energy Conservation Code are to the edition referenced above.

(9) The 2021 International Property Maintenance Code, as published by the International Code Council, 4051 Flossmoor Road, Country Club Hills, IL 60478, September 30, 2020, Chapters 1 through 8 inclusive and Appendix A, is hereby incorporated by this reference as a part of this Building Code to have the same force and effect as if set forth in this Chapter in every particular, save and except such portions as are added, amended, deleted, or replaced in this Chapter. This Code is intended to establish minimum maintenance standards for basic equipment, light, ventilation, heating, sanitation and fire safety. Responsibility is fixed among owners, operators and occupants for code compliance. The IPMC provides for the regulation and safe use of existing structures in the interest of the social and economic welfare of the community. All references in this Code to the International Property Maintenance Code are to the edition referenced above.

(10) The 2021 International Swimming Pool and Spa Code as published by the International Code Council, 4051 Flossmoor Road, Country Club Hills, IL 60478, October 30, 2020, Chapters 1 through 11 inclusive, is hereby incorporated by this reference as a part of this Building Code to have the same force and effect as if set forth in this Chapter in every particular, save and except such portions as are added, amended, deleted, or replaced in this Chapter. This Code is intended to regulate the minimum requirements for the design, construction, alteration, repair and maintenance of swimming pools, spas, hot tubs and aquatic facilities to adequately protect public health, safety and welfare of the community. All references in this Code to the International Swimming Pool and Spa Code are to the edition referenced above.

(11) The 2018 International Existing Building Code, as published by the International Code Council, 4051 Flossmoor Road, Country Club Hills, IL 60478, August 2017, Chapters 1 through 16 inclusive and Appendices A, B and C and Resource A, is hereby incorporated by this reference as part of this Building Code to have the same force and effect as if set forth in this Chapter in every particular, save and except such portions as are added, amended, deleted, or replaced in this Chapter. The adopted code includes comprehensive provisions and standards regulating the construction, alteration, movement, enlargement, replacement, repair, equipment, use and occupancy, location, maintenance, removal and demolition of buildings and structures for the purpose of safeguarding the public health, safety and general welfare. All references in this Code to the International Existing Building Code are to the edition referenced above. (Ord. 1158 §1, 2013; Ord. 1361 §1, 2021; Ord. 1373 §1, 2022; Ord. 1390 §1, 2023)